Top 10 Garage Door Maintenance Tips For Homeowners

Top 10 Garage Door Maintenance Tips For Homeowners

There is no other part of your home that experiences as much wear and tear as your garage door. You never understand how frequently you use your garage door till the day it breaks down on you.

Most of families in the United States use the garage as the primary entryway into their house, being used multiple times throughout the day, thousands of times annually. When kept in good working order, it can provide security and storage at your convenience.

Having a garage can actually make life easier, however when it is not cared for can end up being a safety risk to you, your household, and particularly kids. With it’s natural wear and tear, a garage door cable television can split up or a door opener can malfunction, leading to a risk to your possessions and anyone near your door.

In order to keep it running properly, it is necessary to perform routine upkeep to avoid costly repair work. The following top 10 garage door maintenance ideas for homeowners will help keep your door working correctly for years to come. According to this article, these maintenance pointers need no special skills and generally take less than 10 minutes each to perform.

Required Materials Needed

Avoid last minute trips the hardware shop by having all of your materials onsite and ready ahead of time. You may not use every tool listed, but having it readily available will conserve you time and frustration.

Top 10 Garage Door Maintenance Tips For Homeowners

  • Wrench set
  • Measuring tape
  • Hammer
  • Pliers
  • Screw gun
  • Weatherstrip
  • Lubricant/Cleaner (WD-40).
  • White Lithium Grease.
  • Tooth brush.
  • Flat blade screwdriver.
  • Garage door rollers.
  • Safety First.

In order to ensure security while working on your garage, remember to never remove the lift cable television. The garage cable televisions are under severe tension and will cut like a knife if released.

Never try to adjust or launch the garage door springs. This is a task that ought to be left for the professionals only.

1.) Paying Attention.

When was the last time you aesthetically inspected your garage door? You might not be a certified technician, however you can put in the time to have a look at your garage.

If you have a metal garage, look for rust areas. These areas must be sanded, primed and painted. If you have a wood garage door, it must be checked for water damage. If not sealed appropriately, wood garage can warp and lose their shape in time.

It will likewise be good to wash your door regularly with a versatile cleaner. Your garage door makes up a large portion of the outside of your house, so keeping it tidy and nice will have a positive effect on the appearance of your home.

2.) Watch & Listen To Your Door As It Runs.

Do you have a noisy garage door? Do the springs pulleys and cable televisions on both sides look symmetrical? Does it move smoothly? Or does it jerk in certain locations?

Taking the time to observe and listen to your garage whenever you utilize it is the best safety measure every property owner can perform. By doing this, you will know when something doesn’t sound right, or when something keeps an eye out of location.

3.) Evaluating The Balance.

Initially, disconnect the opener. You do this by pulling the red deal with at the end of the red cable. Once it is detached, open the door about half method. If the garage door starts to close on its own, then the garage door is not balanced effectively. The springs on the door need to be re-adjusted. We recommend that you contact a certified expert to fix or replace your springs.

Your garage opener will need to work more difficult if the door is not properly stabilized. This will eventually shorten the life-span of the door.

4.) Test Security Functions (Auto-Reverse).

There are two safety mechanisms on your garage: mechanical and photocell. A door that does not have these safety features is outdated and requires to be changed instantly.

In order to check the mechanical safety feature on your garage, put a solid things on the ground in the course of the garage door. When the garage touches the item while closing, it ought to instantly return up.

When evaluating the photocell feature on your garage, just stand out your leg in the door’s path when closing. Your leg will can be found in contact with the photoelectric beam (not visible) that runs across the bottom of the door. The garage should immediately reverse once your leg contacts the photoelectric beam.

5.) Aesthetically Inspect Your Cables.

You need to never touch the cable televisions. These high stress cables are accountable for raising the door. They have sufficient force to cause severe injuries, even death. You can visually check that garage cables too if there are any broken hairs or anything that is out of order. If you see there is damage, we advise that you hire an expert.

6.) Clear The Tracks.

Have a look at the tracks on both sides of the door. Clean the garage door tracks so there is no particles or garbage. Likewise, try to find any physical damage making sure it is straight and aligned. Tracks that are damaged can trigger the door to not be smooth and it will be really noisy.

Spray the garage tracks with a citrus-based solvent or WD-40, then wipe everything clean with a fabric. If required, utilize an old toothbrush to loosen up dirt and gunk, then wipe with a fabric.

Any significant repair work or changes to the tracks ought to be managed by an expert garage door professional.

7.) Apply Oil To The Moving Parts.

Ten minutes of work can add years to the life of your garage door. Keeping your door parts lubricated will keep your garage running smooth and peaceful. Your need to utilize white lithium grease on your garage opener chain and spray lubes on the rollers, hinges, bearings and tracks. Likewise apply grease to the garage door opener chain or drive screw.

Keep in mind, never attempt to do any work on the springs or cables. Leave that to the specialists.

8.) Replace Weatherstripping (If Required).

The weatherstrip is the piece of rubber connected to the bottom of your door. It is called a U-shaped astragal. It keeps that water, particles and rodents from entering your garage. Examine along the side of the door and adjust the stripping if required.

You need to replace the rubber weather strip on your door if it’s beginning to break and break down. Utilize a flat blade screwdriver to remove the old weather strip prior to installing a new one.

They are quickly discovered at any hardware shop like Home Depot or Lowe’s and are usually sold by the foot. All you have to do is discover the width that best fits your circumstance, sufficed to fit your garage, then install. You can also contact your local garage company if you have further questions or issues.

9.) Inspect All The Bolts & Screws On Your Door.

Analyze and tighten up the brackets on the rollers and the bolts with a (socket) wrench. The typical garage opens and closes more than a thousand times a year. It is easy for hardware, screws and bolts to end up being loose with all the movement and vibration.

10.) Replace The Rollers.

Garage rollers that are split, used or broken should be changed instantly. You must just attempt to replace the rollers if it is not connected to the door cable system.

Whether you have nylon rollers or steel rollers on your garage, they need to be inspected a minimum of twice a year and ought to be replaced every 7 years. If you use your door more regularly, then you should inspect your rollers more often throughout the year.

Professional Check-Up.

If you still feel as if you don’t have enough time to do this type of checkup, then call a Garage Door Pros to set up a visit. A lot of garage businesses offer budget-friendly tune-up services to keep your garage door operating efficiently.